GU10 led bulb on a trailing-edge dimmer glows when switched off
A glow when switched off usually has one of three causes: a small current the dimmer lets through when off (common with electronic dimmers), voltage induced from nearby cables, or a fault such as the switch cutting the neutral instead of the live. Fit a dimmer made for LEDs; if the glow stays, have it checked. There's no standard minimum load: use the minimum and maximum printed on your dimmer — with 5 W GU10 bulbs a 10 W minimum needs 2, a 40 W minimum 8. The bulb must be marked dimmable.
A glow when switched off usually has one of three causes: a small current the dimmer lets through when off (common with electronic dimmers), voltage induced from nearby cables, or a fault such as the switch cutting the neutral instead of the live. Fit a dimmer made for LEDs; if the glow stays, have it checked.
Lights for this
Modern Linear Track Light
Sorisaria Wall Sconce
Kaldor Wall Sconce
Reznor Adjustable Arm Wall Sconce
Beaufort Wall Sconce
Orelelaria Wall Sconce
Avenanira Pendant Light
The numbers for this situation
- Typical bulb5 Wled GU10
- Bulbs for a 10 W printed minimum2the minimum printed on your dimmer decides
- Bulbs for a 40 W printed minimum8
- Our GU10 lights stated dimmable8
- Share of our GU10 lights stated dimmable6 %
Worked out, not measured
Where these numbers come from
- Bulbs needed = the minimum printed on the dimmer ÷ the bulb's watts, rounded up; typical bulb wattages are assumptions. Checked against 9 matching lights in our catalogue snapshot of 2026-09-27; 8 can be bought now. Same sums on every page, release families-2026-09-29.
All the numbers
| Minimum printed on the dimmer (W) | Bulbs needed | Load (W) |
|---|---|---|
| 0 | 1 | 5 |
| 10 | 2 | 10 |
| 20 | 4 | 20 |
| 40 | 8 | 40 |























